Truth is that a well mandal headboard can be done with almost anything, today there are many people who choose to input even without it, but ultimately who more and who less just putting something, if only a vinyl and some cushions , point and highlight headboard of bed remains commonplace.
Why not build a wooden headboard unexpected using old wooden shutters. Mandal headboard give a new coat of paint or stain in a tone that contrasts with bedding and other accessories. To design control room, hang vertical blinds so wood blinds are side by side to a stunning focal point when entering room. For a more traditional design, you can install two or three horizontal blinds and through back of bed. Hang shutters so they extend at least two to three inches past two ends of bed.
Use framed in wooden frames as his header design illustrations. Make an arrangement of pictures behind bed to give illusion of a mandal headboard. Use framed photos and pieces of picture in black and white for an unusual and nontraditional header. Space out evenly so they are willing to create appearance of a header. Think about making prints that are within same genre space for a cohesive look. Add color by using red or bright yellow frames for added vitality and color.
You can paint wooden headboard of your bed can become the centerpiece of your bedroom by painting it with vibrant colors that give it from the background, and directly to the viewer’s eye. By removing old paint and apply new, you can revive an old headboard, create a work of art that goes well with the functional character of the bed. Add a protective layer of polyurethane finish at the end, and you have a piece of furniture that looks like new and it will maintain this look without fading. Take the end of the bed frame using a wrench to loosen the screws holding the two together. Spread a cloth on the floor in your workplace, and place the end in the middle of the canvas.
Put on a face mask and goggles. Use an orbital sander to remove all the existing paint from the end. Go over the headboard of the grinding plate, using small circles to peel off the existing paint. Change to a piece of medium-grit sandpaper to remove any paint from small, hard to reach areas in the headboard or the detailed carvings that the grinding machine can be damaged. Clear color from both sides of the headboard. Wipe end with a blow cloth to remove dust.
Apply a primer to the wood designed for latex paint finish paint. Use a brush to apply the primer, moving with the grain of the wood. Let the primer dry before you turn the board over and the priming back. Wait until the primer on the side to dry and before you proceed. Apply base coat of paint to the headboard. If you use multiple colors, then use the lightest color as your base coat. Use a latex paint base coat, which covers both sides of the surface in the same way that you covered it with primer. Wait for the base coat to dry, and then sand it lightly with fine sandpaper to remove brush strokes. Wipe the headboard with the tack cloth.
Mask off the areas of the headboard you want to stay in because the coat. Paint the second color on your headboard just as you did the first. Let the paint dry and then sand it smooth. Repeat this process for each desired color, masking of each section that you do not want to apply the current color to place until the final color. After the last color to dry, remove all the masking tape to reveal the fully painted surface. Cover color with a polyurethane finish. Spray on the surface of the paint that covers the front of the headboard and allow the finish to dry before covering the back. Wait on the back to finish drying, and then connect the end of the bed.
12 Creative Ideas Mandal Headboard Photos